Frequently Asked Questions

Take it to your nearest dealer. Preferably the dealer where your bow was purchased from, if available. You can access dealers near you by using our “Dealer Locator” on the website. You can also send the bow back to Bear Archery with a repair number.  This can be accessed on our website under the “Customer Service” tab.

Do not attempt to shoot the bow again until a competent archery pro shop looks the bow over.  You can also send the bow to us using the “Bow Repair” link here.

75% = Maximum Speed, 80% = -2 FPS, 85% = -3 FPS, 90% = -4 FPS

It is NOT. This bow has a draw length range of 13.5-19.5 inches but cannot be set to a specific draw length.

Yes, Bear Archery selects a number of staffers every year to represent our brands in the field.  You can apply by clicking on the “Sponsorship” link at www.beararchery.com.

Upon checking out, customers will be given the option to input a discount code on the "Information" tab of the checkout process. All coupon codes must be entered exactly as provided and within the correct promotional period.

Product Warranty Registration discount codes and Employee discount codes are seasonal promotions and change depending on available inventory. Escalade Sports reserves the right to change, restrict or cancel promotions at any time without notice. For more details, please visit Terms and Conditions.

Draw weight is measured at 28 inches on traditional bows.

For every inch of draw length above or below 28 inches you add or subtract 2 pounds.  

Your bow may be strung for up to a week.  Any longer and the string should be removed.  Your bow should also be hung horizontally to ensure the tips are not damaged.

All traditional bows should be stored in a climate-controlled environment.  If left in a humid or frigid environment, you risk warping of the bow.  

Bear Archery recommends periodically applying a light coat of furniture paste wax rubbed on with a soft cloth.  

We recommend de-cocking your crossbow each time you’re finished shooting. BearX crossbows should NEVER be cocked longer than 12 hours.

View Trophy Ridge Parts. You can also call customer service at (+1) 800-694-9494.  

Trophy Ridge sights are built to ensure the archer has plenty of vertical and horizontal adjustment.  The likely cause is your bow is out of tune.  We recommend paper tuning the bow before starting to sight in your bow.

Yes, you can set your first pin at 10 yards.  React technology must be used in 10-yard increments.

No, you must set your pins in 10-yard increments.

We suggest using a chronograph to check your bow speed before purchasing your React sight. Trophy Ridge has expanded our React lineup to help archers of all ages and sizes gain access to this amazing technology.

Our exclusive React® Technology allows the sight pins to react to each other, or sight themselves in, after only 2 pin adjustments. With our React® sights, you can be sighted in at 20, 30, 40, 50 and 60 yards in less than 10 minutes.

Learn more about React® Technology here.

No, as long as your arrow weight and spine are consistent, your arrow weight cannot fool our React Technology. The reason is that your other pin gaps are based on your first 2 pin gaps. The further an arrow is propelled from your bow the more gravity affects the arrow forcing it toward the earth. Our React Technology takes into account the rate of drop and your arrow weight.